Site inspection- Step by Step Guide

-












Comments

Post a Comment

Popular posts from this blog

Method Statement for Application of Waterproofing Membrane

-
  Method Statement for Application of Waterproofing Membrane The purpose of the method statement for application of waterproofing is to prevent the water to percolate or penetrate into any underground concrete members. When the water penetrates into the sub-grade concrete-like foundation such as mat foundation, footing, tie beam, etc. the steel reinforcement that embedded in the concrete would corrode due to a chemical reaction caused by water and the structure would eventually fail. Application of  waterproofing  especially for large structures would have to be strictly supervised by a quality engineer in order to prevent failure of application or nonconformity to the quality procedure. In this method statement for application of waterproofing membrane, we’ll be going to use the membrane type waterproofing, this type of  waterproofing  is advisable for structures like high-rise buildings which has a deeper foundation where water pressure is extremely high...
Read more

Understanding About Formwork In Construction

-
Image
Formwork is an important part in the construction. Especially in the construction of columns, slabs, beams and core walls in the building project. It is more critical when the project is a hi-rise building, if it’s getting higher and higher as it progresses. And it would perhaps to be dealt with utmost care. Now, here is the excerpt of the certain requirement from structural specification about formwork. So, you may be able to easily find out and read this article when you want to come back into the specification about formwork including “stripping.” Formwork shall be of steel or timber providing it is constructed so as to be rigid during casting of the concrete and sufficiently water tight to prevent loss of the liquid from the concrete and it shall be adequately propped and braced in their correct position and shall be sufficiently strong to resist distortion by the pressure of the wet concrete constructional loads, wind and other forces. The deflection shall ...
Read more

Method Statement for Installation of Anchor Bolts

-
Method Statement for Installation of Anchor Bolts Construction of a pre-engineered structure such as steel structure is a challenging work. It requires the full attention of qualified staff.  It also needs a qualified  QAQC Engineer  to inspect the work of a construction team to ensure that the completed work is fully compliant with the project requirement. One of the most challenging jobs in the construction of steel structure is the installation of anchor bolts where it is considered to be an ankle joint of a steel column. A method statement of the installation of anchor bolt should be developed to make sure that the process is true against the approved drawing and the most important, it should be within the safe working condition. Here is the method statement for installation of anchor bolts. 1. Title Method Statement for Installation of Anchor Bolts 2. Purpose This method statement shows and explains the procedure must be followed to i...
Read more